jetAudio.com
JetAudio / COWON America Support Center » Knowledgebase » iAUDIO 10 Installation Guide
 
 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options


9:30 am to 5 pm PT (Mon-Fri)
 iAUDIO 10 Installation Guide
Solution
Warning/Caution
 The battery must be fully charged before upgrading firmware.
 Do not press the reset button during upgrading.
 Backup any important files to your computer before upgrade.
 You must upgrade the supplied firmware from COWON SYSTEMS.
Note
COWON Media Center- JetAudio can easily convert or rip your files to compatible files.

---------------------------

Please read notes before install the firmware.
1. Unzip the latest firmware provided by COWON.COM and save it in any folder in your PC. 2. Please connect your iAUDIO 10 directly to the USB port on your PC with the cable that provided 3. The battery must be fully charged.
After unzip the firmware file, select all files in the firmware folder and right click to copy.
Connect iAUDIO 10 to the PC by USB cable.
When connection is made, paste the firmware files to the root folder of iAUDIO 10.
Click [Safely Remove Hardware] icon in the tray at the lower right corner of your computer screen to disconnect the device from the PC.
Make sure the iAUDIO 10 is turned off and then turn on the device. iAUDIO 10 will automatically start firmware upgrade.
You will be able to check version of firmware on settings > system > information.



Article Details
Article ID: 388
Created On: 30 Mar 2012 11:09 AM

 This answer was helpful  This answer was not helpful

 Home | Register | Submit a Ticket | Knowledgebase | News
Language: